apb
07-17 10:23 PM
The current fee schedule will apply to all applications filed under Visa Bulletin No. 107 through August 17, 2007. (The new fee schedule that becomes effective on July 30, 2007, will apply to all other applications filed on or after July 30, 2007).
Please note that fee change will be effective for EAD/AP after July/30
Please note that fee change will be effective for EAD/AP after July/30
chalamurariusa
04-28 10:02 AM
Some one please advice!!!!!!
gc_chahiye
11-04 11:33 PM
i did through google but i cant found actually. please respond who knows.thank you in advance.
Another good bet for trying to get a break like what you are looking for is Sulekha:
http://classifieds.sulekha.com/new-jersey/alllocalities/it-jobs-training/allsubcategories/adlistings.aspx
Most of the jobs there are from consulting companies. Being on H1 with them can get hard (with things like salary/bench etc) depending on how well run that place is, but on EAD your life should be much simpler. I could not find anything on transcription, but lots of entry-level jobs in QA or in SAP that provide training etc. All the best.
When you get some responses from these people, ask around (friends etc) to see if anyone has had a good/bad experience with that firm.
Again, unlike H1, being on EAD your life is much simpler and options are much more open. You can walk away if they dont treat you well. All you need is a break and these guys might be able to provide one.
Another good bet for trying to get a break like what you are looking for is Sulekha:
http://classifieds.sulekha.com/new-jersey/alllocalities/it-jobs-training/allsubcategories/adlistings.aspx
Most of the jobs there are from consulting companies. Being on H1 with them can get hard (with things like salary/bench etc) depending on how well run that place is, but on EAD your life should be much simpler. I could not find anything on transcription, but lots of entry-level jobs in QA or in SAP that provide training etc. All the best.
When you get some responses from these people, ask around (friends etc) to see if anyone has had a good/bad experience with that firm.
Again, unlike H1, being on EAD your life is much simpler and options are much more open. You can walk away if they dont treat you well. All you need is a break and these guys might be able to provide one.
motown
10-21 10:50 PM
I work as a dentist in a company which was held in partnership by 2 partners.I have a approved H1b and my I 140 is filed in May 2006.Now as of Oct 01 the original company is finished as the partners have seperated.I am confused about my case, if I have to file a new H1b and 140 or an ammendment or just nothing.The tax id number for the company which will now give my paycheck has changed.As for me my work location has not changed and I still work in the same position.Can I take paychecks from the new company which now belongs to one of the partners or do I need to inform immigration to refile H1 or I140 or both.Any advice is appriciated
AC-21 Public law 106-396 might be applicable to your case. Please read the last paragraph in page 10 from the following link
http://www.uscis.gov/graphics/lawsregs/handbook/ac21guide.pdf
I am not an attorney. Use it at your own risk.
Good Luck.
Motown
AC-21 Public law 106-396 might be applicable to your case. Please read the last paragraph in page 10 from the following link
http://www.uscis.gov/graphics/lawsregs/handbook/ac21guide.pdf
I am not an attorney. Use it at your own risk.
Good Luck.
Motown
more...
black_logs
03-25 08:34 AM
TOI is the champion of these kind of nonsense, after S.1932 was passed by the senate they published an article saying 'Good news, A bill for Green card increase, H1B increase ..... have been passed by U.S. lawmakers' with no mention of house hurdle etc. I fail to digest that the reporter who is writing the article doesn't know, after the bills get passed in the Senate they go to Congress. But it's TOI they can do that.
Today Times of India has published an article "Immigrants cost Americans low-skilled jobs". They have referred a study by Center for Immigration Studies. I have already thrashed TOI for publishing such nonsense and urged them to stop helping anti-immigrant groups by publishing such stupid articles. All members please post comments on this article and ask TOI to stop nonsense. whether low-skilled or high skilled this is going to help anti-immigrant cause.
http://timesofindia.indiatimes.com/articleshow/1463861.cms
Today Times of India has published an article "Immigrants cost Americans low-skilled jobs". They have referred a study by Center for Immigration Studies. I have already thrashed TOI for publishing such nonsense and urged them to stop helping anti-immigrant groups by publishing such stupid articles. All members please post comments on this article and ask TOI to stop nonsense. whether low-skilled or high skilled this is going to help anti-immigrant cause.
http://timesofindia.indiatimes.com/articleshow/1463861.cms
logiclife
08-02 02:20 PM
1)Is it safe and legal to travel with Visa stamping till august 2006 from company A , with 221 (g) stamped in his passport (when he went for
visa for company B), with proper H1B documents valid till 2009 from company
C?
No Safe as he will be questioned at port of entry
2)Will there be questions at the port of entry ?
A Lot
3)Will there be any issues because of the 221(g)
stamping in the passport (company B visa)?
Yes.
4)Any chance he wont be let inside U.S ?
90%
5)Can he show them the h1b approvals for company C ?
No..as it will confusing for immigration officer with so many 797 forms.
6)Any tips to handle the officer at POE?
Can try with chinese or african-american.Little liberal
7)If every thing goes smooth, will his new I-94 be
valid till june 2009 (date on his company C petition)
or just another 4 weeks (company A petition)?
Just 4 weeks
8)If by any chance if he is deported, will it affect
his future prospects in the U.S?
Yes.. He may not not reenter US for next 10 Yrs.
I am Immigration Lawyer.Better Talk to the Attorney.
You probably meant to say that you are NOT an immigration lawyer. Correct?
visa for company B), with proper H1B documents valid till 2009 from company
C?
No Safe as he will be questioned at port of entry
2)Will there be questions at the port of entry ?
A Lot
3)Will there be any issues because of the 221(g)
stamping in the passport (company B visa)?
Yes.
4)Any chance he wont be let inside U.S ?
90%
5)Can he show them the h1b approvals for company C ?
No..as it will confusing for immigration officer with so many 797 forms.
6)Any tips to handle the officer at POE?
Can try with chinese or african-american.Little liberal
7)If every thing goes smooth, will his new I-94 be
valid till june 2009 (date on his company C petition)
or just another 4 weeks (company A petition)?
Just 4 weeks
8)If by any chance if he is deported, will it affect
his future prospects in the U.S?
Yes.. He may not not reenter US for next 10 Yrs.
I am Immigration Lawyer.Better Talk to the Attorney.
You probably meant to say that you are NOT an immigration lawyer. Correct?
more...
funnyman
07-04 09:16 PM
"__________________
EB3 Worldwide
PD 07/11/03
I-140 RD 02/27/06 AD 03/22/06
I-485 RD 05/07/07 filed at TSC
FP 06/02/07 (Code 3) - sent to USCIS same day
LUD 06/05/07
"
For RD to be 05/07/07, you must be eligible to file in the month of May and hence PD should be current as per April VB.
EB3 ROW was still Aug 2002 in April visa bulletin. How could you file for I-485?
EB3 Worldwide
PD 07/11/03
I-140 RD 02/27/06 AD 03/22/06
I-485 RD 05/07/07 filed at TSC
FP 06/02/07 (Code 3) - sent to USCIS same day
LUD 06/05/07
"
For RD to be 05/07/07, you must be eligible to file in the month of May and hence PD should be current as per April VB.
EB3 ROW was still Aug 2002 in April visa bulletin. How could you file for I-485?
bbct
02-11 08:05 PM
http://www.thedegreepeople.com/eb-petition.html
So go ahead on sign in the petition. Dont know how far it goes but atleast it does something good.
I get a message "Remote submissions are not allowed."
So go ahead on sign in the petition. Dont know how far it goes but atleast it does something good.
I get a message "Remote submissions are not allowed."
more...
Dhundhun
07-10 06:30 PM
On I-797 from Y it doesn't have I-94 number on it anywhere. since its through consular processing.
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
Basically the H-1B with company Y required Change of Status (COS). I am not familiar with this type of situation - whether you can get change of status done in USA or not. If not I think this is a case, which requires Visa to be stamped in home country.
Could somebody throw more infromation on this? Thanks
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
Basically the H-1B with company Y required Change of Status (COS). I am not familiar with this type of situation - whether you can get change of status done in USA or not. If not I think this is a case, which requires Visa to be stamped in home country.
Could somebody throw more infromation on this? Thanks
milind70
07-24 08:39 PM
Somebody told me that I can get a letter from Indian consulate certifying by Date of Birth using my passport and I can use that in place of the Birth certificate for 485 ?? IS this true, if yes, will this be accepted by USCIS ??
In the first case if I proceed as of now and when I get an RFE, what should I do ???
Thanks
In most of the case Birth Certificates issued by Consulates are not accepted USCIS.Submit you Birth certificate along with two affidavits you should be fine.
In the first case if I proceed as of now and when I get an RFE, what should I do ???
Thanks
In most of the case Birth Certificates issued by Consulates are not accepted USCIS.Submit you Birth certificate along with two affidavits you should be fine.
more...
pappu
05-11 01:24 PM
they seem to favor unskilled workers category and talk about only 5 thousand Gcs available.
kaisersose
06-02 10:42 AM
Kaiser.
thx for replying . but I do not want both Visa on Oct1.
My L1 ends sometime in mid September.
My H1 would be effective only from Oct 1.
So, during this time I will be out of status right ?
So if I do my L1 Extension, I might solve the problem.
But Will doing that affect the approved H1 ?
Pls. help. thanks.
As far as I know, your H will impact your L, not the other way around. Your most recent I-94 will determine your status. Your H I-94 will start from Oct 01.
1. If your L extension cannot happen before Oct 1st, your L I-94 starts earlier than the H and will beinvalidated on October 1st.
2. If your L extension happens after October 1st - it will not happen because at that time, your status would have changed to H. So the ext will be denied as far as I know.
If you wish to continue your L after Oct 1st, get an extension approved, travel out of the country before Oct 1st, get a visa stamped and return on L after Oct 1st.
thx for replying . but I do not want both Visa on Oct1.
My L1 ends sometime in mid September.
My H1 would be effective only from Oct 1.
So, during this time I will be out of status right ?
So if I do my L1 Extension, I might solve the problem.
But Will doing that affect the approved H1 ?
Pls. help. thanks.
As far as I know, your H will impact your L, not the other way around. Your most recent I-94 will determine your status. Your H I-94 will start from Oct 01.
1. If your L extension cannot happen before Oct 1st, your L I-94 starts earlier than the H and will beinvalidated on October 1st.
2. If your L extension happens after October 1st - it will not happen because at that time, your status would have changed to H. So the ext will be denied as far as I know.
If you wish to continue your L after Oct 1st, get an extension approved, travel out of the country before Oct 1st, get a visa stamped and return on L after Oct 1st.
more...
us_employee
02-09 05:39 PM
I had similar issue and went upto the local Deferred Inspection Office but couldn't get it done there. So I travelled upto Mexico border, didn't even have to enter into Mexico. I went upto the office and the officer had an idea about my situation and issued new I-94. I found (while searching through posts on other threads) that some DI offices do realize about this problem and they issue I-94 within U.S.
I'd say try at one of your DI offices if not you can travel upto the border. Call the border to make sure if they do issue I-94 for such cases.
I'd say try at one of your DI offices if not you can travel upto the border. Call the border to make sure if they do issue I-94 for such cases.
samrat_bhargava_vihari
01-21 11:39 PM
Kirshana_2001,
Did you verified with Attorney? If they offer you permanent employment I think they should file your I-140, then only they can transfer H1. In that case if you get I-140 approval then move to the permanent employment else stick with your company. ( Think of EB2 and Priority date transfer also).
Best of Luck...
Did you verified with Attorney? If they offer you permanent employment I think they should file your I-140, then only they can transfer H1. In that case if you get I-140 approval then move to the permanent employment else stick with your company. ( Think of EB2 and Priority date transfer also).
Best of Luck...
more...
optimystic
04-22 03:49 PM
I-485 could be from family based, EB1 and ROW categories. I dont all these became Unavailable on July 2nd. Also you are right, USCIS didnt reject applications even though they came in between July 2nd and 17th.
That particular date of July 11 at NSC is for EB I-485 !
That particular date of July 11 at NSC is for EB I-485 !
fromnaija
10-05 12:49 PM
On the flip side, I know people who have gotten selected in DV the very first time. Like you said, that's why it's called a lottery. Anything can happen.
Does anyone know if it makes any difference if you file early or late? I know it's supposed be completely random but does anyone have any theory on how you might have a better chance? My take is that if you file too early (first few days) and if (with a big if) there is a bug in system then your application might get lost. So let the bugs be fixed in first few days and then file.
This is my strategy. I play my entry in the early weeks and play my wife's entry towards the end.
Does anyone know if it makes any difference if you file early or late? I know it's supposed be completely random but does anyone have any theory on how you might have a better chance? My take is that if you file too early (first few days) and if (with a big if) there is a bug in system then your application might get lost. So let the bugs be fixed in first few days and then file.
This is my strategy. I play my entry in the early weeks and play my wife's entry towards the end.
more...
nyte_crawler
03-06 02:28 PM
yes EB3 India. I think when I look back, its just a matter of luck. Once it was RFE, second time I got a second finger printing and third time they just did'nt pick it up. But USCIS has been very promptful in approving my EADs and AP. I could be very well one of the oldest processing case sitting in the TSC shelf.
(1700 days)
(1700 days)
waitnwatch
07-16 06:28 PM
Your post resembles one of those ads with deceptive fine print! Do you work for an advertising company by any chance?
People providing all the red dot's........don't be so uptight or high strung. Don't you see the GCK's hidden talent!!!!!!!!!!!!!!!!!:)
Please see links below:
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
:cool:
When will the next month dates come out ???
People providing all the red dot's........don't be so uptight or high strung. Don't you see the GCK's hidden talent!!!!!!!!!!!!!!!!!:)
Please see links below:
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
:cool:
When will the next month dates come out ???
arunmohan
04-08 03:35 PM
Please refer to my signature for PD
lostinbeta
10-04 12:10 AM
Ok, Hold the CTRL key on your keyboard then click on the layer that contains your original rectangle.
Like where it says, make sure you have the marquee tool active in the tools menu on the left side, otherwise the rest won't work. The marquee tool is the first tool on the upper left hand side. It is a dotted rectangle.
Press the up arrow once and the left arrow once (on your keyboard)
Create a new layer...self explanitory
Fill it with white... self explanitory
Hold CTRL again and select the layer with your original rectangle again. Like you did earlier in this step. Make sure the new layer you created with the white fill is still active (it will be blue or something ,you will know if it is selected).
Hit the delete key on your keyboard (or go to edit/cut or something, it also might be backspace on a MAC).
Deselect with CTRL+D - self explanitory
Now the next part of this I don't really agree with. Just keep the lines layer selected and use the down and right arrows on your keyboard to move it into place so it looks like the image in the tutorial.
Hope this helps. That was only step 2! If you have any questions about the other steps, just post I guess :)
mmm, photoshop......... its the best. I eat it for breakfast, lunch and dinner:)
Like where it says, make sure you have the marquee tool active in the tools menu on the left side, otherwise the rest won't work. The marquee tool is the first tool on the upper left hand side. It is a dotted rectangle.
Press the up arrow once and the left arrow once (on your keyboard)
Create a new layer...self explanitory
Fill it with white... self explanitory
Hold CTRL again and select the layer with your original rectangle again. Like you did earlier in this step. Make sure the new layer you created with the white fill is still active (it will be blue or something ,you will know if it is selected).
Hit the delete key on your keyboard (or go to edit/cut or something, it also might be backspace on a MAC).
Deselect with CTRL+D - self explanitory
Now the next part of this I don't really agree with. Just keep the lines layer selected and use the down and right arrows on your keyboard to move it into place so it looks like the image in the tutorial.
Hope this helps. That was only step 2! If you have any questions about the other steps, just post I guess :)
mmm, photoshop......... its the best. I eat it for breakfast, lunch and dinner:)
thomachan72
04-18 07:17 AM
one of my friends.
Premium processing, general (non-masters) catagory got email notification for reciept of his application yesterday evening.
Premium processing, general (non-masters) catagory got email notification for reciept of his application yesterday evening.
